Durable Matt Pro

Top quality, water-based washable interior top-coat paint based on acrylic emulsion offering a matt finish. Suitable for use on standard interior wall and ceiling surfaces. The unique formula lives up to the challenges of everyday life. The durable surface allows marks and stains to be easily wiped away. It gives a tough film with high scrub resistance (Class 1 for ISO 11998) and protects surfaces. It provides excellent coverage with a high-quality finish. It is easy to use and leaves no brush or roller marks.

Stores with our tinting machine can mix over 15,000 different colours, from over 30 different colour charts (including designer ranges)

Scrubbable
Excellent Opacity
Trade Quality
Easy to Apply

Durable Matt Pro: High-Quality, Washable Matt Finish for Interior Surfaces

About the
Durable Matt Pro

WRX Trade Durable Matt Pro is a top-quality, water-based acrylic emulsion paint ideal for interior walls and ceilings. It offers a tough, washable surface that resists marks and stains, providing excellent coverage and a high-quality finish with no brush or roller marks.

Ensure surfaces are clean, dry, and sanded if glossy. Apply two coats, thinning with water if needed. Touch dry in 30 minutes, with a 4-6 hour interval between coats. Store in dry conditions, protected from extreme temperatures.

Specifications

For best results, all surfaces must be sound, clean, suitably dry and free from anything that will
interfere with the adhesion of the materials to be applied. Remove any loose or flaking material
and repair damaged areas. Glossy surfaces should be sanded down to provide a key. Wear a
suitable mask if dry sanding. Avoid the inhalation of dust. Porous surfaces should be coated
with a ‘mist’ coat of WRX Trade Durable Matt Pro diluted with 30% clean water by volume.
Chalking, weathered and porous powderly surfaces should be treated with colourless surface
stabiliser.

Do not apply in damp or humid conditions or room temperatures below +8°C. Stir well
before use. It can be thinned up to 10% with clean water if required. Suitable for application
by brush, medium pile roller, conventional or airless spray. For best results, load the brush
generously. Apply paint evenly and avoid overspreading. Two coats are recommended.
Extra coats may be required to cover an existing darker colour.

WRX Trade Durable Matt Pro will cover up to 16 m² per litre in single coat, depending on the
smoothness and absorbency of the surface.

Touch dry in 30 minutes under normal conditions. Allow 4-6 hours between coats. High
humidity can extend the drying time.

Remove as much paint as possible from brushes and rollers, before cleaning with warm soapy
water. Do not empty paint into drains or watercourses. Some local authorities have special
facilities for the disposal of waste paint. Replace the lid firmly

Store and move in dry conditions in a secure upright position. Protect from direct sunlight, frost
and extreme temperatures.