Contact Cleaner

Contact cleaner with high dissolving properties. Product characteristics : Non-corrosive. Leaves no residue. Non-conductive. Powerful jet spray. Can be used in various positions. ? Not for sale to persons under the age of 16. By placing an order for this product, you declare that you are age over. This item must be used responsibly and appropriately.

WRX Contact Cleaner: Powerful, Non-Corrosive, and Residue-Free

About the
Contact Cleaner

WRX Contact Cleaner is a high-quality spray designed for cleaning electrical contacts, offering high dissolving properties, a non-corrosive and non-conductive formula, and a powerful jet spray with a 360° valve. Suitable for switches, batteries, contact points, and circuit boards, this 400 ml cleaner ensures no residue is left behind and contains approximately 97% VOC.

Always use responsibly and follow safety instructions, allowing a minimum of 15 minutes for solvent evaporation before reactivating electrical installations.


Contact Points
Printed Circuit Board Switches
Multiple Sockets

High dissolving properties Leaves no residue
360° valve
Powerful jetspray

Contents : 400 ml
Basis : Aliphatic Hydrocarbons with alcohol
Propellant : Carbondioxide
Colour : Transparent
Scent : Characteristic
Relative density at 20°C : 0,73 g/ml
Yield : 3,8 g/sec
Refractive Index at 20°C : 1,370
Vapour pressure at 20°C : 5,5 to 6,5 bar
VOC Content : Approximately 97% w/w

Before use,carefully read the directions on the packaging and act accordingly
The aerosol should have room temperature.
Best processing temperature 5 to 30°C.
Before use, shake the aerosol.

Switch off electrical installations before treatment.
Spray the parts to be treated until the contamination has disappeared.
Contaminated contact cleaner should be regarded as chemical waste.
Only switch on the electrical installation after evaporation of the solvent (minimum of 15 minutes).