Satinwood Paint

To achieve the best results when using WRX Trade Water-based Satinwood Paint, follow these surface preparation guidelines:

Ensure that the surfaces are completely dry and free from dirt, dust, oil, old paint residues, and any loose textures that may not adhere properly to the paint.

For first-time painting on raw surfaces, consider using a wood stain as a base coat.

Lightly sand the surface to create a smooth canvas, and wipe it with a damp cloth to remove any dust before painting.

For optimal results, apply the paint with a brush, following the grain of the wood.

After use, clean all tools with water to maintain their condition.

WRX Trade Water-based Satinwood Paint exhibits excellent adhesion to various wooden surfaces and offers a high level of hiding power.

It is designed to be free of issues like cracking, swelling, and peeling, preserving the natural texture of the wood.

This water-based paint is odor-free, environmentally friendly, and lead-free.

It is resistant to water, household chemicals, and shocks, ensuring lasting protection.

WRX Trade Satinwood Paint does not yellow over time, maintaining the integrity of your wooden surfaces.

Avoid applying the paint in damp or humid conditions or at room temperatures below 10°C.

Stir the paint well before use; it is ready for use, but if thinning is required, add a maximum of 5% clean water.

You can apply the paint with a brush or roller, but for optimal results, generously load the brush.

Evenly apply the paint while avoiding overspreading. Two coats are recommended, though additional coats may be needed for significant color changes.

WRX Trade Water-based Satinwood Paint offers excellent coverage, with an estimated 14-18 square meters covered per liter, depending on the surface.

Under normal conditions, the paint is touch-dry within an hour, with a 6-hour waiting period between coats. A fully dry finish is achieved within 24 hours.

After painting, remove excess paint from brushes and rollers before cleaning them with warm, soapy water.

Do not pour excess paint into drains or watercourses; check with local authorities for proper disposal facilities.

Ensure that the paint can lid is firmly replaced to preserve the paint's quality.

Store WRX Trade Water-based Satinwood Paint in dry conditions, in a secure upright position, and protect it from frost and extreme temperatures.

Keep the product out of reach of children and avoid contact with eyes, skin, or clothing.

Refrain from eating, drinking, or smoking while using the product.

Avoid releasing the product into the environment.

In case of inhalation, move to fresh air, and if complaints persist, seek medical attention.

If ingested, do not induce vomiting; instead, seek immediate medical attention.

In the event of skin contact, remove contaminated clothing and clean the skin with water, soap, and special cleaning cream.

In case of eye contact, flush the eyes with a copious amount of water, and if irritation persists, seek medical attention.

The paint contains a mixture of 5-chloro-2-methyl-4-isothiazolin-3-one and 2-methyl-2H-isothiazol-3-one (Cas No:55965-84-9) and may produce an allergic reaction.

WRX Trade Water-based Satinwood Paint complies with the EU limit values (cat.A/d) for VOC emissions, set at 130 g/l in 2010.

This product contains a maximum of 30 g/l VOC, contributing to reduced atmospheric pollution.

This information provides a comprehensive understanding of WRX Trade Water-based Satinwood Paint, helping customers make informed choices and ensuring safe usage.