Search
Filters
Fast drying quality. Cap shows colour of contains. WRX Wheel Paint for rims and other parts of the car. Weather resistant. Excellent adhesion. Remove rust, grease and dirt from base. ? Not for sale to persons under the age of 16. By placing an order for this product, you declare that you are age over. This item must be used responsibly and appropriately. WRX001_-_WRX WHEELSILVER 500 ML_(GB)
  • Package Quantity

£10.99

WRX Wheel Silver

Product Description

High quality lacquer to embellish and repair steel and light metal rims and hubcaps.

Product Characteristics

  • Fast drying
  • Good coverage
  • Resistant to petrol, chemicals and weather influences
  • Non-fading and UV-resistant
  • Lasting gloss
  • Good surface hardness
  • Wear-resistant and scratch free
  • Excellent adhesion

Physical and Chemical Characteristics

  • Contents                                :500 ml
  • Base                                      :Acrylic resin
  • VOC-content                         :Approximately 90% w/w
  • Solid content                         :Approximately 10% w/w
  • Coverage                              :4 to 5 rims / hubcaps
  • Dust dry                                :After 5 to 10 minutes
  • Tack free                               :After 10 to 20 minutes
  • Hardened/re-sprayable         :After 2 hours
  • Heat resistant                       :To 110°C

Usage

Before use, carefully read directions on the packaging and act accordingly.

Pre Treatment 

The surface should be clean, dry and free of grease. Remove loose old lacquer and rust and sand the surface. Apply a layer of primer suitable for the surface. After drying, sand the base layer (grain 600).

Treatment

The surface should be clean, dry and free of grease. The aerosol should have room temperature. Best processing temperature 15 to 25°C. Before use, shake the aerosol for 2 minutes and spray a sample. Distance to the surface to be treated approximately 25 to 30 centimetre.

Apply the lacquer in several thin layers. Before applying the next layer, again shake the aerosol.
In order to obtain high gloss, apply a finishing coat of acrylic clear varnish.

After use, clean the valve (turn aerosol upside down and press the nozzle for approximately 5 seconds).
The drying time depends on the ambient temperature, the humidity of the air and the thickness of the lacquer applied.

WRX Wheel Silver

Product Description

High quality lacquer to embellish and repair steel and light metal rims and hubcaps.

Product Characteristics

  • Fast drying
  • Good coverage
  • Resistant to petrol, chemicals and weather influences
  • Non-fading and UV-resistant
  • Lasting gloss
  • Good surface hardness
  • Wear-resistant and scratch free
  • Excellent adhesion

Physical and Chemical Characteristics

  • Contents                                :500 ml
  • Base                                      :Acrylic resin
  • VOC-content                         :Approximately 90% w/w
  • Solid content                         :Approximately 10% w/w
  • Coverage                              :4 to 5 rims / hubcaps
  • Dust dry                                :After 5 to 10 minutes
  • Tack free                               :After 10 to 20 minutes
  • Hardened/re-sprayable         :After 2 hours
  • Heat resistant                       :To 110°C

Usage

Before use, carefully read directions on the packaging and act accordingly.

Pre Treatment 

The surface should be clean, dry and free of grease. Remove loose old lacquer and rust and sand the surface. Apply a layer of primer suitable for the surface. After drying, sand the base layer (grain 600).

Treatment

The surface should be clean, dry and free of grease. The aerosol should have room temperature. Best processing temperature 15 to 25°C. Before use, shake the aerosol for 2 minutes and spray a sample. Distance to the surface to be treated approximately 25 to 30 centimetre.

Apply the lacquer in several thin layers. Before applying the next layer, again shake the aerosol.
In order to obtain high gloss, apply a finishing coat of acrylic clear varnish.

After use, clean the valve (turn aerosol upside down and press the nozzle for approximately 5 seconds).
The drying time depends on the ambient temperature, the humidity of the air and the thickness of the lacquer applied.

Write your own review
  • Only registered users can write reviews
*
*
Bad
Excellent
  • Only registered users can write reviews
*
*
*
*
Product tags