Search
Filters
Universal Acrylic Primer Wrx Rust Protective Primer provides the right basis for a long-lasting top coat. Prevents new rust formation, seals traces from sanding. Remove rust, grease and dirt from base. ? Not for sale to persons under the age of 16. By placing an order for this product, you declare that you are age over. This item must be used responsibly and appropriately.
  • Package Quantity

£10.99

WRX Universal Acrylic Primer Grey

Product Description

High quality, fast drying primer to treat surfaces, treated and untreated, of wood, metal, aluminium, glass, stone and various types of plastic.
Suitable primer as pre treatment for re-spraying with all lacquer systems (alkyd resin, nitro cellulose, 1-K acrylic and 2-K acrylic lacquers).

Product Characteristics

  • Fast drying
  • Excellent coverage and filling property
  • Corrosion preventive
  • Easy to sand, both wet and dry (from grain 400)
  • Re-sprayable with all lacquer systems

Physical and Chemical Characteristics

  • Contents                                 :500 ml
  • Base                                       :Nitro-cellulose binder
  • VOC-content                          :Approximately 85% w/w
  • Solid content                          :Approximately 15% w/w
  • Coverage                               :1,5 to 2 m²
  • Dust dry                                 :After 5 to 10 minutes
  • Tack free                               :After 10 to 20 minutes
  • Hardened/re-sprayable         :After 2 hours
  • Heat resistant                        :To 110°C

Usage

Before use, carefully read the directions on packaging and act accordingly.

Pre Treatment

The surface should be clean, dry and free of grease. Remove loose old lacquer and rust and sand the surface.

Treatment

The surface should be clean, dry and free of grease. The aerosol should have room temperature. Best processing temperature 15 to 25°C. Before use, shake the aerosol for 2 minutes and spray a sample. Distance to the surface to be treated approximately 25 to 30 centimetre.

Apply the primer in several thin layers. Before applying the next layer, again shake the aerosol.
After use, clean the valve (turn aerosol upside down and press the nozzle for approximately 5 seconds).
The drying time depends on the ambient temperature, the humidity of the air and the thickness of the lacquer applied.

WRX Universal Acrylic Primer Grey

Product Description

High quality, fast drying primer to treat surfaces, treated and untreated, of wood, metal, aluminium, glass, stone and various types of plastic.
Suitable primer as pre treatment for re-spraying with all lacquer systems (alkyd resin, nitro cellulose, 1-K acrylic and 2-K acrylic lacquers).

Product Characteristics

  • Fast drying
  • Excellent coverage and filling property
  • Corrosion preventive
  • Easy to sand, both wet and dry (from grain 400)
  • Re-sprayable with all lacquer systems

Physical and Chemical Characteristics

  • Contents                                 :500 ml
  • Base                                       :Nitro-cellulose binder
  • VOC-content                          :Approximately 85% w/w
  • Solid content                          :Approximately 15% w/w
  • Coverage                               :1,5 to 2 m²
  • Dust dry                                 :After 5 to 10 minutes
  • Tack free                               :After 10 to 20 minutes
  • Hardened/re-sprayable         :After 2 hours
  • Heat resistant                        :To 110°C

Usage

Before use, carefully read the directions on packaging and act accordingly.

Pre Treatment

The surface should be clean, dry and free of grease. Remove loose old lacquer and rust and sand the surface.

Treatment

The surface should be clean, dry and free of grease. The aerosol should have room temperature. Best processing temperature 15 to 25°C. Before use, shake the aerosol for 2 minutes and spray a sample. Distance to the surface to be treated approximately 25 to 30 centimetre.

Apply the primer in several thin layers. Before applying the next layer, again shake the aerosol.
After use, clean the valve (turn aerosol upside down and press the nozzle for approximately 5 seconds).
The drying time depends on the ambient temperature, the humidity of the air and the thickness of the lacquer applied.

Write your own review
  • Only registered users can write reviews
*
*
Bad
Excellent
  • Only registered users can write reviews
*
*
*
*