Search
Filters
Silicone spray to lubricate and protect plastic or rubber parts.Product characteristics: Prevents creaking and squeaking. Prevents freezing and drying out. Water-repellant. Outstanding mechanical and thermal stability. Not for sale to persons under the age of 16. By placing an order for this product, you declare that you are age over. This item must be used responsibly and appropriately.
  • Package Quantity

£8.79

WRX Silicone Spray

Product Description

High quality silicone spray to lubricate and protect plastic or rubber parts.

Application

  • Door rubbers
  • Creaking plastic parts
  • Dashboards
  • Bumpers
  • Sunshine roofs
  • Rails (caravan, blinds)
  • Sliding doors
  • Saw blades
  • Remove agents for moulds

Product Characteristics

  • Excellent adhesion

  • Water-repellent

  • Prevents freezing and drying out of rubber parts

  • Prevents creaking and squeaking of plastic parts

  • Outstanding mechanical and thermal stability

  • Resistant to weather influences

  • Resistant to weak acids and bases

  • Directed jetspray

Physical and Chemical Characteristics

  • Contents                                  : 400 ml
  • Basis                                        : Polydimethylsiloxaan
  • Scent                                       : Characteristic
  • Relative density at 20°C          : 0,72 g/ml
  • Vapour pressure at 20°C         : 3 to 4 bar
  • Refractive Index at 25°C         : 1,403
  • Disruptive strength                  : 14 kv/mm at a temperature of 20°C
  • Resistance                              : 4 x 1015 Ohm/cm
  • Temperature resistant             : -50°C to +200°C
  • pH-value                                 : Neutral
  • VOC-content                           : Approximately 88% w/w
  • Colour                                     : Transparent

Usage

Before use, carefully read the directions on the packaging and act accordingly.

The aerosol should have room temperature.
Best processing temperature 5 to 30°C.
Before use, shake the aerosol.
Apply silicone spray in a thin layer. Optimum lubrication is obtained after evaporation of the solvent (approximately 1 minute).

 

WRX Silicone Spray

Product Description

High quality silicone spray to lubricate and protect plastic or rubber parts.

Application

  • Door rubbers
  • Creaking plastic parts
  • Dashboards
  • Bumpers
  • Sunshine roofs
  • Rails (caravan, blinds)
  • Sliding doors
  • Saw blades
  • Remove agents for moulds

Product Characteristics

  • Excellent adhesion

  • Water-repellent

  • Prevents freezing and drying out of rubber parts

  • Prevents creaking and squeaking of plastic parts

  • Outstanding mechanical and thermal stability

  • Resistant to weather influences

  • Resistant to weak acids and bases

  • Directed jetspray

Physical and Chemical Characteristics

  • Contents                                  : 400 ml
  • Basis                                        : Polydimethylsiloxaan
  • Scent                                       : Characteristic
  • Relative density at 20°C          : 0,72 g/ml
  • Vapour pressure at 20°C         : 3 to 4 bar
  • Refractive Index at 25°C         : 1,403
  • Disruptive strength                  : 14 kv/mm at a temperature of 20°C
  • Resistance                              : 4 x 1015 Ohm/cm
  • Temperature resistant             : -50°C to +200°C
  • pH-value                                 : Neutral
  • VOC-content                           : Approximately 88% w/w
  • Colour                                     : Transparent

Usage

Before use, carefully read the directions on the packaging and act accordingly.

The aerosol should have room temperature.
Best processing temperature 5 to 30°C.
Before use, shake the aerosol.
Apply silicone spray in a thin layer. Optimum lubrication is obtained after evaporation of the solvent (approximately 1 minute).

 

Write your own review
  • Only registered users can write reviews
*
*
Bad
Excellent
  • Only registered users can write reviews
*
*
*
*
Product tags