WRX Trade Exterior Paint
A top quality water-based, pure acrylic copolymer washable emulsion with an semi-matt finish. WRX Exterior Paint has very high coverage because of it’s advanced formulation. Ease of application and time saving properties are superior. It is super durable against rough atmospheric conditions and alkali effects. The high breathing capability allows the expulsion of the humidity and water from application wall, while it does not pass any humidity or water inwards. Its adhering capabilities allow the paint not to crack or peel by time. The use of the most advanced pigment technologies allows WRX Exterior Paint to keep it’s bright colour for years. It can be applied on all kinds of exterior surfaces prepared for paint.
For best results, make sure surfaces to be painted are sound, clean and dry. Remove any loose or flaking material. Repair damaged areas. Glossy surfaces should be sanded down to provide a key. Wear a suitable mask if dry sanding. Avoid the inhalation of dust. Prime new, bare and absorbent surfaces with the appropriate WRX Trade Primer. Special precautions should be taken during surface preparation of pre-1960s paint surfaces as they may contain harmful lead
To ensure adhesion of free micronised powders on surface finished surfaces and to increase adherence, plaster surfaces primer, plaster and paste on the most absorbent surfaces. If it is desired to change color on old painted solid surfaces, one coat of covering primers should be applied. It is necessary to wait at least 6 hours for drying the primer before going through final coat application.
Do not apply in damp or humid conditions or room temperatures below 10°C. Stir well before use. Thin 10 % with clean water. Suitable for application by brush or roller. For best results, load the brush generously. Apply paint evenly and avoid overspreading. 2 coats are recommended. Extra coats may be required if the colour change is strong.
WRX Exterior Paint will cover approximately 14-18 square metres per litre depending on the surface.
Touch dry in an hour under normal conditions. Allow 6 hours between coats. Through dry is 24 hours.
Remove as much paint as possible from brushes and rollers, before cleaning with warm soapy water. Do not empty paint into drains or watercourses. Some local authorities have special facilities for the disposal of waste paint. Replace lid firmly.
Store and move in dry conditions in a secure upright position. Protect from frost and extreme temperatures.
Health & Safety Information
Keep out of reach of children. Do not get in eyes, on skin, or on clothing. Do not eat, drink or smoke when using this product. Avoid release to the environment. Inhalation: Remove to fresh air. In case of persistent complaints obtain medical attention. Ingestion: Do not induce vomiting. Immediately obtain medical attention. Skin contact: Remove contaminated clothing. Clean the skin with water, soap and special cleaning cream. Eye contact: Flush eye with copious quantities of water. If irritation occurs, obtain medical attention.
Contains mixture of 5-chloro-2-methyl-4-isothiazolin-3-one and 2-methyl-2H-isothiazol-3-one (Cas No: 55965-84-9) and 2-octyl-2H-isothiazol-3-one (Cas No: 26530-20-1). May produce an allergic reaction.
EU limit value for this product (cat.A/d) : 40 g/l (2010). This products contains max 35 g/l VOC.
VOCs. (Volatile Organic Compounds) contribute to atmospheric pollution.