WRX Trade Art Pearl Effect Interior Wall Paint
Art Pearl Effect Interior Wall Paint. Acrylic emulsion water-based, silk matt, pearlescent, cleanable, top coat interior paint. Applied surfaces get a prestigious effect due to pearl layer of the paint. Different application techniques give different effects to the surface.
For best results, make sure surfaces to be painted are sound, clean and dry. Remove any loose or flaking material. Repair damaged areas. Glossy surfaces should be sanded down to provide a key. Wear a suitable mask if dry sanding. Avoid the inhalation of dust. Prime new, bare and absorbent surfaces with the appropriate WRX Trade Primer. Special precautions should be taken during surface preparation of pre-1960s paint surfaces as they may contain harmful lead.
To ensure adhesion of free micronised powders on surface finished surfaces and to increase adherence, plaster surfaces primer, plaster and paste on the most absorbent surfaces. If it is desired to change color on old painted solid surfaces, one coat of covering primers should be applied. It is necessary to wait at least 6 hours for drying the primer before going through final coat application.
WRX Art-Pearl Effect should be applied with short hair satin roller. Effect rollers, natural sea sponges, chamois leather can be also used for the application. Do not apply in damp or humid conditions or room temperatures below 10°C. Stir well before use. Ready to use. Do not dilute. If WRX Art-Pearl Effect will be applied as a pattern, first the base with different WRX Interior Paint color should be applied it two coats following the application of WRX Art-Pearl Effect by satin roller and the pattern should be given by a second applier as requested. If different color base is not required WRX Art-Pearl Effect will be applied in three coats. The pattern should be given before the third coat is dry.
WRX Art-Pearl Effect will cover approximately 15-22 square metres per litre depending on the surface.
Touch dry in an hour under normal conditions. Allow 6 hours between coats. Through dry is 24 hours.
Remove as much paint as possible from brushes and rollers, before cleaning with warm soapy water. Do not empty paint into drains or watercourses. Some local authorities have special facilities for the disposal of waste paint. Replace lid firmly.
Store and move in dry conditions in a secure upright position. Protect from frost and extreme temperatures.
Health & Safety Information
Keep out of reach of children. Do not get in eyes, on skin, or on clothing. Do not eat, drink or smoke when using this product. Avoid release to the environment. Inhalation: Remove to fresh air. In case of persistent complaints obtain medical attention. Ingestion: Do not induce vomiting. Immediately obtain medical attention. Skin contact: Remove contaminated clothing. Clean the skin with water, soap and special cleaning cream. Eye contact: Flush eye with copious quantities of water. If irritation occurs, obtain medical attention. Contains mixture of 5-chloro-2-methyl-4-isothiazolin-3-one and 2-methyl-2H-isothiazol-3-one (Cas No: 55965-84-9) and 2-octyl-2H-isothiazol-3-one (Cas No: 26530-20-1). May produce an allergic reaction.
EU limit value for this product (cat.A/d) : 30 g/l (2010). This products contains max 11 g/l VOC.
VOCs. (Volatile Organic Compounds) contribute to atmospheric pollution.